MODULAR MOUNTING

Part number 367-3161 is a Havis accessory designed for professional use. TECHTOWER, PRINTER TRAY ARM WITH FIXED POLE CLAMP, 7.70? WIDE X 9.95? DEEP.

Part number 367-4008-11 is a Havis accessory designed for professional use. The Durable Cast Metal non-rotating clamp can be positioned anywhere on the Pole and tightened with the hex tool provided with the TechTower Base. The pivot feature allows an upward Monitor tilt of 50 degrees and a downward tilt of 10 degrees. No.

Part number 367-3465 is a Havis accessory designed for professional use. This metal powder coat painted tray includes an offset swivel so that it can be _moved_ closer to the pole by simply rotating it 180 degrees. It is sized for Epson_s TM T88 IV and Toshiba_s TCx Single Station printers. Polyethylene washers provide.

Part number 367-2008-45 is a Havis accessory designed for professional use. The Durable Cast Metal rotating clamp can be positioned anywhere on the Pole and tightened with the hex tool provided with the TechTower Base. The arm provides 4inof lift above the center of the clamp, and the pivot feature allows an upward Monitor.

Part number 367-4008-15 is a Havis accessory designed for professional use. The Durable Cast Metal rotating clamp can be positioned anywhere on the Pole and tightened with the hex tool provided with the TechTower Base. It provides 330 degrees of rotation around the axis of the pole. The pivot feature allows an upward Moni.

Part number 367-4005-01 is a Havis accessory designed for professional use. TECHTOWER, BASE, GROMMET MOUNT, FOR USE WITH 2.00_ DIA POLES, REV A 09/09/2015.

Part number 367-4005-11 is a Havis accessory designed for professional use. The Sturdy Cast Metal Grommet Base can mount above or below your countertop and includes mounting hardware and a TechTower Tool kit. The Pole includes a decorative plastic cap and edge liners to protect cables, and is large enough to allow all your.

Part number 367-2009-40 is a Havis accessory designed for professional use. TECHTOWER, PAYMENT TERMINAL ARM WITH ROTATING POLE CLAMP, FOR HAVIS CONVERSION STANDS.

Part number 367-4005-03 is a Havis accessory designed for professional use. Base - Free-Standing, for use with 8in, 12in, 16in, 20in, and 24inLong Poles Pole not included.

Part number 367-4006-21 is a Havis accessory designed for professional use. TECHTOWER, 16_ POLE, TWO CABLE CUTOUTS AND EDGE LINERS AT BOTTOM AND TOP/CENTER, MODULAR POINT OF SALE SYSTEM.

Part number 367-4005-30 is a Havis accessory designed for professional use. TECHTOWER, FREESTANDING BASE, 16? POLE.

Part number 367-2008-40 is a Havis accessory designed for professional use. The Durable Cast Metal non-rotating clamp can be positioned anywhere on the Pole and tightened with the hex tool provided with the TechTower Base. The arm provides 4inof lift above the center of the clamp, and the pivot feature allows an upward Mon.

Part number 367-4006-22 is a Havis accessory designed for professional use. TECHTOWER, 24_ POLE, TWO CABLE CUTOUTS AND EDGE LINERS AT BOTTOM AND TOP/CENTER, MODULAR POINT OF SALE SYSTEM.

Part number 367-4005-10 is a Havis accessory designed for professional use. The Sturdy Cast Metal Grommet Base can mount above or below your countertop and includes mounting hardware and a TechTower Tool kit. The Pole includes a decorative plastic cap and edge liners to protect cables, and is large enough to allow all your.

Part number 367-2009-49 is a Havis accessory designed for professional use. Payment Device Arm, Fixed Length, Fixed Pole Clamp Included, for Tailwind Firstbase Connect.

Part number 367-4012-04 is a Havis accessory designed for professional use. TECHTOWER PRE-CONFIGURATION, GROMMET BASE WITH 16? POLE, DOUBLE PIVOT MONITOR MOUNT ON ROTATING CLAMP.

Part number 367-4008-16 is a Havis accessory designed for professional use. TECHTOWER, DOUBLE PIVOT, FLAT PANEL MONITOR MOUNT, ROTATING CLAMP, REV A 09/23/2015.

Part number 367-4783 is a Havis accessory designed for professional use. MONITOR WALL MOUNT, SINGLE PIVOT, QUICK RELEASE.

Part number 367-4012-03 is a Havis accessory designed for professional use. TECHTOWER PRE-CONFIGURATION, GROMMET BASE WITH 16? POLE, DOUBLE PIVOT MONITOR MOUNT ON FIXED CLAMP.

Part number 367-5204-K20 is a Havis accessory designed for professional use. DM-1000 Stand, with Adapter Interface for HP Engage One, includes Connection Accessory to attach directly to the HP USB Hub NOTE Does not support weight and offset of the HP Engage One Pro use DM-1000 HD or MM-1000 instead.

Part number MM-10-202 is a Havis accessory designed for professional use. Collar Arm, use with Existing 45mm Dia Poles, Rotates up to 330 deg.

Part number MM-10-203 is a Havis accessory designed for professional use. Channel Mount, use with New ENS MM-10-1XX Poles only.

Part number MM-10-101 is a Havis accessory designed for professional use. 16? EXTRUDED POLE WITH RECTANGULAR BASE PLATE.

Part number MM-10-150 is a Havis accessory designed for professional use. 18in Welded Pole, 45mm 1.75in dia,, for creating unique MM-1000 configurations by adding peripherals such as monitorsx, paymentx, printerx and Scanner xattach these using Collar Mount MM-10-201 or Collar Mount Arm MM-10-202.

Part number MM-10-102 is a Havis accessory designed for professional use. 24? EXTRUDED POLE WITH RECTANGULAR BASE PLATE.

Part number 367-4008-21 is a Havis accessory designed for professional use. The Durable Cast Metal non-rotating clamp can be positioned anywhere on the Pole and tightened with the hex tool provided with the TechTower Base. The double-pivot feature allows an upward Monitor tilt of 50 degrees and a downward tilt of 10 degree.

Part number MM-10-201 is a Havis accessory designed for professional use. Collar Mount, use with Existing 45mm Dia Poles, Rotates up to 330 deg.

Part number MM-10-116 is a Havis accessory designed for professional use. 16in Pole with Round Base mount, 1.75in 45mm Diameter Pole.

Part number MM-10-124 is a Havis accessory designed for professional use. 24in Pole with Round Base mount, 1.75in 45mm Diameter Pole.

Part number MM-10-601 is a Havis accessory designed for professional use. Scanner Mount, for Handheld Scanners, attaches to VESA Plate.

Part number MM-10-301 is a Havis accessory designed for professional use. Monitor Mount, Single Pivot up/down , for 75/100mm VESA complaint monitors.

Part number MM-10-320 is a Havis accessory designed for professional use. Monitor Mount on 16in long folding extension arms, Double Pivot up/down and left/right for 75/100mm VESA compliant monitors.

Part number MM-10-520 is a Havis accessory designed for professional use. Printer Mount on 16in long folding arms, Small, for Printers with bases up to 5.7´┐¢ 145mm Wide X 6´┐¢ 152mm Deep.

Part number MM-10-401 is a Havis accessory designed for professional use. Payment Terminal Mount, Includes Plinth for all Tailwind Back-plates.

Part number MM-10-521 is a Havis accessory designed for professional use. Printer Mount on 16in long folding arms, Medium, for Printers with bases up to 150mm Wide X 200mm Deep.

Part number MM-10-204 is a Havis accessory designed for professional use. Channel Arm, use with New ENS MM-10-1XX Poles only.

Part number MM-10-502 is a Havis accessory designed for professional use. Printer Mount, Large, for Printers with bases up to 7.8in 198mm Wide X 11.25in 286mm Deep.

Part number MM-10-522 is a Havis accessory designed for professional use. Printer Mount on 16in long folding arms, Large, for Printers with bases up to 7.8in 198mm Wide X 11.25in 286mm Deep.

Part number MM-10-402 is a Havis accessory designed for professional use. PAYMENT TERMINAL MOUNT FOR METAL STAND CONVERSION KITS.

Part number MM-10-505 is a Havis accessory designed for professional use. Printer Mount, Medium, for Printers with bases up to 150mm Wide X 200mm Deep.

Part number MM-10-501 is a Havis accessory designed for professional use. Printer Mount, Small, for Printers with bases up to 5.7´┐¢ 145mm Wide X 6´┐¢ 152mm Deep.

Part number MM-10-302 is a Havis accessory designed for professional use. Monitor Mount, Double Pivot up/down and left/right, for 75/100mm VESA compliant monitors.

Part number MM-10-850 is a Havis accessory designed for professional use. 18in Welded Pole, for 1 monitor weighing up to 15 lbs. Includes both the Collar Mount which can rotate about the pole or be fixed in position and the Single Pivot Monitor Mount. Add peripherals such as additional monitorsx, paymentx, printerx and Sc.

Part number MM-10-851 is a Havis accessory designed for professional use. 18in Welded Pole, for 2 monitors weighing up to 15 lbs each. Includes both the Collar Mounts which can rotate about the pole or be fixed in position and the Single Pivot Monitor Mounts. Add peripherals such as additional monitorsx, paymentx, printer.

Part number SD0005 is a Havis accessory designed for professional use. LOCKING LATCH AND KEY´┐¢This locking latch replaces the quick release latch on the Payment Mount to provide security that is econimical and hidden under the device. NOTE: This is already included with SAFEBASE Stands.

Part number MM-10-901 is a Havis accessory designed for professional use. CABLE KIT, FOR LARGE BUNDLES.